Propylene Glycol Antifreeze and Engine Coolant

AMSOIL Antifreeze & Coolant is newly formulated to provide benefits far beyond those found in today's conventional antifreeze and coolant products. This revolutionary formulation provides maximum antifreeze and cooling protection in the most extreme temperatures and operating conditions. And unlike conventional ethylene glycol based products, which are highly toxic and even fatal, AMSOIL Antifreeze & Coolant is formulated with propylene glycol. It is biodegradable and requires no special disposal costs or procedures in most areas. Above all, its low toxicity presents no threat to children, pets or wildlife.

Now, AMSOIL Antifreeze & Coolant provides even greater benefits:

Lasts Longer

AMSOIL Antifreeze & Coolant contains a proprietary poly organic acid technology. It eliminates the need for periodic changing or recharging of cooling systems. There is no need for supplemental coolant additives. AMSOIL Antifreeze & Coolant provides extended service life in all gasoline and diesel vehicles. It can be used for seven years or 250,000 miles in passenger cars, light-duty trucks, vans and recreational vehicles. It lasts seven years or 750,000 miles in over-the-road diesel trucks.

Compatible With Other Fluids

AMSOIL Antifreeze & Coolant is dyed neutral yellow and is compatible with all ethylene and propylene antifreeze and coolant formulations on the market, including DEX-Cool®, Sierra®, and Zerex®. It is also compatible with fully formulated diesel antifreezes and other organic acid technology (OAT) and hybrid organic acid technology (HOAT) formulations.

Stops Leaks

AMSOIL Antifreeze & Coolant adheres to metal. It self-seals hairline cracks in welds and seams to prevent leaks, without additional stop-leak products or fibrous materials.

Prevents Metallic Corrosion

Independent tests reveal AMSOIL Antifreeze & Coolant surpassed standards for metallic corrosion. It plates to metal to protect even when exposed to acids and salt spray. Standard allowances for loss in aluminum and solder are less than 60 mg. AMSOIL Antifreeze & Coolant lost 0 mg in aluminum and less than 6 mg in solder.

Standard for iron, steel, copper and brass allow a maximum loss of less than 20 mg. AMSOIL Antifreeze and Engine Coolant never exceeded 3 mg loss in any of those metals in a testing period that was run for 10 weeks, three weeks longer that required tests.

Recommended for Applications Requiring the Following Specifications:

• Automotive and light Duty Service (ASTM D-5216 & ASTM D-2570)
• Heavy Duty Service (ASTM D-6211 & TMC RP330)