|
Vehicles are in descending order by Vehicle Model Year
|
|
| Filtration Systems Application Guide |
2003 Dodge Ram 4.7L Engine
This By-Pass was installed without drilling any holes and no additional custom bracket. |
2002 Dodge Ram 2500 Laramie with a 5.9L Cummins
The Bypass is located under the left front fender, mounted to the fender cross brace. A steel plate is bolted to the fender brace and the AMSOIL mounting bracket is bolted to the steel plate and cross brace. |
2002 Chevrolet 2500 HD Silverado Crew Cab Pickup 6.6L Duramax Diesel
Dual-remote installation on a 2002 Chevrolet 2500 HD Silverado Crew Cab Pickup with a 6.6L Duramax Diesel. They mounted the standard AMSOIL BK-17 directly to the frame rail with long 1/4" bolts. |
|
2002 GMC Envoy 4.2L Gasoline Engine
The dual remote mounting bracket was welded to the outboard side of the frame on the passenger side. This location is easy to access, close to the OEM filter location, and protected from exhaust heat. |
|
2001 Dodge/Cummins
Feeds the AMSOIL BMK-11 from an existing port on the OEM oil filter mount, and returns the oil to the "Oil Fill" cap using the AMSOIL BP-89 "swivel" fitting. Mounted the BMK-11 on the passenger side battery using a simple piece of 2x4" spacer material. |
2001 Dodge Ram 2500 5.9L HO Cummins
Fabricated a bracket to mount the filters on the right side battery holder. Attached are pictures of the installation and a drawing of the fabricated mounting plate. |
|
|
|
|
|
|
2000-2002 Toyota Tundra
AMSOIL BMK-13 Dual Remote Oil Filtration Kit |
|
|
1999 Dodge Cummins Diesel Pickup 4X4
The mounting location is on the cross member under the radiator at the right side of the vehicle. The owner wanted to mount the filters as high as possible because he does some off roading and was afraid of a stick or rock hitting them. |
|
|
1998 Dodge Cummins
Custom Mounting Bracket. Installation bracket for the Dodge Cummins. The bracket replaces the battery mount on the passenger side battery. The bracket and setup fits all Dodge Cummins from 1994 through 2002. |
1998 Dodge Ram 1500
Mounted the dual remote filtration system not only to be functional, but for presentation as well. User fabricated a mount for existing threaded holes in the fender well toward the front of the vehicle. |
|
1998 Volkswagen Beetle
Turbocharged Direct Injection (TDI) Diesel |
1997 Chevrolet 2500 4x4 Engine - 454 cu in.
Very simple installation! Everything was in the BMK-13 kit that was required and only had to move one bracket. There is plenty of room on the left front inner frame directly under the drivers seat and the unit is well protected for off road use. |
1997 Chevrolet C-2500 Van w/5.7 L Engine
AMSOIL BMK-13 By-Pass filters mounted directly to body box section, near gas fill, with self tapping screws. Required 90 degree fittings and extra hose. |
|
|
|
|
|
1990 SeaRay 270 Sundancer Boat w/Twin 4.3 LX Mercruiser Sterndrives
Two AMSOIL BMK-13 By-Pass filter systems mounted under floor supports. |
1988 Olds Cutlass Cierra 3.8L Engine
The By-Pass System was installed for a show using a BE90 & SDF29. The installation was right by the book. The feed was teed off the oil sending unit and the return was to the oil fill cap. |
|
Disclaimer: These installation examples have been submitted by sources independent of AMSOIL INC. and may not comply with AMSOIL INC. installation instructions or application recommendations. |
|
