Saber Synthetic 100:1 Pre-Mix 2-Cycle Oils

See Article:Two-Cycle Engine Applications and Lubrication Needs

New AMSOIL Saber Professional (ATP) and Saber Outboard (ATO) Synthetic 2-Cycle Oils are specifically designed for lean mix ratios in pre-mix applications. Saber Professional contains high temperature detergents for small power equipment. Saber Outboard contains lower temperature dispersants for water-cooled outboard motors. Extensive testing shows superior lubricity and cleanliness properties at lean mix ratios of these premium synthetic formulations.

• Saber Professional is "Smokeless"
• Saber Outboard is a very low smoke, low odor product
• At 100:1, both oils produce 30 percent lower emissions than oils mixed at 50:1
• Saber Professional is recommended for ISO-L-EGD applications
• One mix ratio for everything eliminates confusion
• Both oils are versatile and very good for many applications
• Cost effective compared to oils mixed at 50:1 or richer
• Saber Outboard exhibits low aquatic toxicity
• Lean mix ratio prevents plug fouling and exhaust port deposits

Product Code: ATP & ATO

Product Description:
AMSOIL Saber Professional (ATP) and Outboard (ATO) Synthetic 100:1 Pre-Mix 2-Cycle Oils are formulated with exclusive AMSOIL synthetic base oils and premium additives. Designed for lean mix ratios in two-cycle motors, Saber 2-Cycle Oils have excellent lubricity and cleanliness properties, controlling friction and preventing wear, plug fouling, ring sticking and exhaust port blocking. AMSOIL Synthetic 100:1 2-Cycle Oils have been protecting and providing improved performance in two-cycle motors since 1973.

Saber Professional
Saber Professional (ATP) is specifically designed for small engines including, but not limited to, chain saws, lawn equipment, blowers, chop saws, pumps, scooters and go-carts. It is also very good for use in motorcycles, snowmobiles, ATVs, jet boats and personal watercraft. Saber Professional is formulated with high temperature detergent additives that prevent hard carbon deposits from forming in these hot operating motors. Saber Professional is “smokeless” and delivers as much as 30 percent fewer emissions at 100:1 mix ratios than oils mixed at 50:1. Equipment operators subjected to smoke and fumes will benefit from these low emission properties. Because one mix ratio satisfies multiple pieces of equipment, Saber Professional eliminates mix ratio confusion. Saber Professional is recommended for pre-mix where ISO-L-EGD, JASO FC or API TC is specified.

APPLICATIONS
AMSOIL Saber 100:1 2-Cycle Oils are recommended for 100:1 mix ratios in normal service and 50:1 to 80:1 mix ratios in severe service applications such as commercial equipment operations and racing.