Synthetic Automatic Transmission Fluid |
 |
Improves fuel efficiency, reduces transmission temperatures and increases transmission life. Provides unsurpassed thermal stability and up to five times the service life of conventional ATFs. Delivers maximum protection for towing and other severe-duty applications.
Product Code: ATF
For DEXRON®III, MERCON®, Ford M2C138-CJ, Ford M2C166-H and Chrysler ATF Plus, MS-7176B Applications.
Recommended for use in applications requiring Honda Z-1 transmission fluids.
Use where ATF is recommended in Mobile or Stationary Hydraulic and Power Steering units.
Transmission Fluid Evacuation Service - Bulletin From Filters Manufacturers Council (PDF File 16k) |
|
Recommended for applications requiring the following specifications:
- GM Dexron II, Dexron III
- Ford Mercon, Mercon V
- Chrysler ATF+, ATF+2, ATF+3, ATF+4
- Mitsubishi Diamond SP II & III
- Allison C-3 & C-4 and TES-295
- Caterpillar Powershift Transmission TO-2 & TO-3
- Voith Commercial Transmissions
- GM Strasbourg (European Imports) and Opel
- Applications requiring Honda Z-1 transmission fluids
|
Click here for "12 Easy Steps To Changing Your Transmission Fluid"
Or click here for PDF version
"I grew tired of reworking transmissions and changed to AMSOIL Transmission Fluid, resulting in a drastic reduction in transmission failures."--G.H., Ozark, Alabama |
PRODUCT DESCRIPTION
AMSOIL Synthetic Automatic Transmission Fluid exceeds the performance requirements for domestic and foreign automatic transmission fluid applications. AMSOIL ATF provides automatic transmissions, power steering units and hydraulic equipment with excellent lubricating protection and better performance over a wider temperature range than do conventional petroleum fluids.
Resists Oxidation and Thermal Degradation
AMSOIL ATF resists thermal and oxidative degradation up to three to five times longer than conventional transmission fluids do. It protects clutches, planetary gears, valves, pumps and seals from damaging sludge and varnish deposits. AMSOIL ATF helps prevent component overheating and ensures cooler, smoother transmission operation.
Provides Low Temperature Protection
AMSOIL ATF outperforms petroleum fluids in low temperature fluidity. In fact, AMSOIL ATF offers three times the cold temperature fluidity required by current automatic transmission fluid specifications. AMSOIL ATF provides easier starting, faster warm-ups, smoother shifting and improved fuel economy.
Anti-Wear Protection
AMSOIL ATF provides smooth shifting and long, trouble-free transmission life. In addition, the anti-wear additive package makes AMSOIL ATF an excellent lubricant in other hydraulic systems. In tests designed to measure wear characteristics under severe service and high pressure operating conditions, AMSOIL ATF far exceeds the requirements of hydraulic equipment manufacturers.
Extended Drain Intervals
AMSOIL ATF is formulated for extended drain intervals. Transmissions usually operate under severe service conditions. They are subjected to extensive idling, frequent short trips, cold temperature driving, sustained hot weather driving or trailer towing. When conventional transmission fluid is used, it should be changed every 15,000 to 30,000 miles. AMSOIL ATF should be changed at intervals up to three times longer than the recommendations of the vehicle manufacturer.
APPLICATIONS
AMSOIL Synthetics Automatic Transmission Fluid is completely compatible with other synthetic and petroleum automatic transmission fluids. AMSOIL ATF is a universal, multifunctional fluid and greatly reduces the need for specialized fluid inventories and the possibilities of misapplication.
SERVICE LIFE
AMSOIL ATF has an expected fluid life of three times the automatic transmission manufacturer's recommendations. Drain intervals may be extended indefinitely when fluid analysis is used.
|
TYPICAL TECHNICAL PROPERTIES |
|
AMSOIL 100% Synthetic Automatic Transmission Fluid (ATF) |
|
Kinematic Viscosity @ 100°C, cSt (ASTM D-445) |
7.5
|
|
Kinematic Viscosity @ 40°C, cSt (ASTM D-445) |
36.0
|
|
Viscosity Index (ASTM D-2270) |
182
|
| Noack Volatility, % weight loss (DIN 51581) |
10.8
|
| Flash Point °C (°F) (ASTM D 92) |
222 (432)
|
|
Pour Point °C (°F) (ASTM D 97) |
-56 (-69)
|
| Four Ball Wear Test (ASTM D 4172B: 40 kg, 75°C, 1200 rpm, 1 hour, Scar in mm) |
0.40
|
| Brookfield Viscosity (cP) |
-10°C = 465 |
| Brookfield Viscosity (cP) |
-20°C = 1030 |
| Brookfield Viscosity (cP) |
-30°C = 2505 |
| Brookfield Viscosity (cP) |
-40°C = 7150 |
|
